Author: MengMeng

1 2 326 / 26 POSTS
PowerShell to Automate Cisco UCSM (4): PS with .Net to develop UI and provision service profile

PowerShell to Automate Cisco UCSM (4): PS with .Net to develop UI and provision service profile

Introduction PowerShell to Automate UCS (1): Lab Setup introduced the UCSM and PowerTool lab setup. PowerShell to Automate UCS (2): PowerGUI Editor in [...]
Site-to-Site FlexVPN Lab 4: Spoke-to-Spoke with NHRP and VTI

Site-to-Site FlexVPN Lab 4: Spoke-to-Spoke with NHRP and VTI

Lab Introduction This lab is the final post in my site-to-site FlexVPN series. I may further write up AnyConnect FlexVPN depending on my time (as we a [...]
Site-to-Site FlexVPN Lab 1: static tunnel + pre-shared key

Site-to-Site FlexVPN Lab 1: static tunnel + pre-shared key

This is a translation version of my original post in Chinese. There are 4 labs in my site-to-site FlexVPN series using CSR1000v on GNS3 (ref. Install [...]
站点间FlexVPN试验(四):SPOKE和SPOKE间动态隧道

站点间FlexVPN试验(四):SPOKE和SPOKE间动态隧道

MengMeng:今天写这个好累,丢了之前的环境、配置,为了今天这篇全部重做的。。。 试验介绍 本次试验在试验(三)的基础上用NHRP进一步建立SPOKE和SPOKE间的动态隧道。   实验三:用virtual template建立HUB和SPOKE间隧道,ikev2加密保护。最后 [...]
站点间FlexVPN试验(二): 静态隧道 (static tunnel)+证书认证(PKI)

站点间FlexVPN试验(二): 静态隧道 (static tunnel)+证书认证(PKI)

  试验介绍: 这次试验还是2个站点间FlexVPN配置。和之前的试验(一)不同,这次的试验用证书PKI做认证,而不是PSK。   试验拓扑如下。本试验只用到HUB1和SPOKE1,其他设备是为别的试验准备的。 HUB1作为证书服务器(CA),SPOKE1向HUB1申请并 [...]
站点间FlexVPN试验(三):HUB和SPOKE间动态隧道

站点间FlexVPN试验(三):HUB和SPOKE间动态隧道

关于FlexVPN和ipsec vpn 之前有朋友问说FlexVPN和ipsec vpn不是一样么 ?   首先,请大家不要过多关注各种vpn的名字,这都是思科或者其他厂商做市场做宣传而起的,没有太多意义。大家需要关注的是用到什么协议,协议原理是什么。就比如你可以叫张三、也可以叫李四 [...]
1 2 326 / 26 POSTS